Displays and Signal Conditioners
Displays and Signal Conditioners
The Displays and Signal Conditioners page covers Novotechnik’s line of signal conditioners, displays and process control indicators. Novotechnik signal conditioners provide a highly stable constant voltage to position sensors to help ensure accurate interference-free signal transmission over long distances.
- Interfaces with Linear Series: TLH and LWH
- Standardized ouput signals:
0 to 10 V
± 10
0 to 20 mA
4 to 20 mA
- Analog signal conditioner for potentiometric linear and rotary sensors
- High impedance input for potentiometer
- Basic version with fixed amplification
- Normalized outputs:
0 to 10 V or 4 to 20 mA
- Interfaces with Potentiometric and Angular position sensors
- Standardized ouput signals:
0 to 10 V
± 10 V
0 to 20 mA
4 to 20 mA
- Interface module for position sensors
- Available with electrical isolation (DC/DC trasformer) as an option
- Standardized output signals 0 to 10 V 0 tp 20 mA 4 to 20 mA
- The zero point and range can be adjusted independently
- High precision signal conditioner Interfaces with potentiometric position sensors
- Auto-calibration: one button press to set zero and another for span
- User selectable output of either 0 to 10 V or 4 to 20 mA
- Signal conditioner
- Supplies highly stable voltage to sensors Standard outputs: 0 to 10 V, ±10 V, 0 to 20 mA, 4 to 20 mA
- Adjustable zero point and range
- Outstanding typ. Linearity: 0.01 % of F.S.
- Sealed housing IP 66
- Programmable Process Control Indicator with control switches*
- Inputs for: potentiometers, current / voltage, temperature sensors, more <
- Accuracy of 0.1% + 1 digit
- Display range of -99 999 to 999 999
- Up to 40 meas./sec
- RS 232 or RS 485 outputs*
- Three power supply options
- Displays units
- Process control indicator with digital display
- Precision of 0.01%
- Scope of measurement range -9999 to +40,000
- Standardized output up to 32 meas/s
- Tare function
- Peak memory
- Digital Indicator
- Optimized for sensors
- 4 relay set-point outputs
- RS232 output
- Voltage or current analog output
EasyAdapt is a programming tool for the programmable Vert-X MH-C2 Series of rotary angle sensors. In includes a tool that connects between a PC and a MH-C2 sensor as well as a software programming application that runs on Windows™ XP, Vista, or Windows 7.
Products that are user programmable include Vert-X Series: 1300, 2200, 3700, 5100, 8800, 13E, 22E, 27E, 31E, 37E and 90E.